 |
MZV |
|
Smaller sizes only for applications such as needle bearings and grease seal.
|
 |
M |
B
|
Metal cased standard Oil Seal with vulcanised sealing lips. This type is frequently replaced by type R.
|
 |
MST |
BS
|
Similar to type M but with additional dust lip. Applications are the same as type RST, when the requested type is not available.
|
 |
M-DUO |
|
With two sealing lips, for sealing two separate media. Limited stock is available.
|
 |
MEX |
|
External sealing type, whereby the metal case is mounted on the shaft.
|
 |
GV |
C
|
Totally enclosed metal casing for extra reinforcement, and a vulcanised rubber sealing lip. It is widely employed for larger shaft diameters for example in heavy industry such as roller bearings.
|
 |
GVST |
CS
|
Similar to type GV, but with additional dust lip.
|
 |
GVP |
|
Oil Seal with double metal case and assembled rubber sealing lip. Seals low pressures as well. It is available in almost every size from at least 100 mm inside diameter.
|
| |
GVPST |
|
Similar to type GVP, but with additional dust lip.
|
 |
VSS |
|
Special type for sealing valve stems in engines. It is only produced on demand.
|
 |
MR |
|
Oil Seal commonly used in engines. Press fitting of a metal case combined with a better internal sealing rubber case.
|
 |
MRST |
|
Similar as type MR with additional dust lip.
|
 |
M-T |
|
Oil Seal with a PTFE layer on the sealing lip to reduce friction and heat development. Its application is in Formula 1 engines. Not available from stock.
|
 |
MST-T |
|
Similar to type M-T but with additional dust lip. Not available from stock.
|
