Radiamatic® Oil Seals
- In the case of repair the use of a Radiamatic® with rubber lock is recommended
- The rubber lock is a small, vulcanised 'rubber area' without fabric
- With it, all Radiamatic® made from NBR, HNBR and FKM are adhesible
- The rubber lock has no effect on the operating behaviour
- Usable in both the original equipment as well as in replacement need
- Also available in split version
| Type | Description | Application | Pressure | Speed | Temperature | |
|---|---|---|---|---|---|---|
 | Radiamatic® R 35 (361kB) | Simmerring with a fabric reinforced static part that is securely joined to the elastomer sealing lip. The sealing lip is also pre-loaded with a garter spring. | Mills, ship building, steel hydraulics engineering, wind power plants. | 0,05MPa | 20m/sec | -30/+100C |
 | Radiamatic® R 36 (190kB) | Simmerring with a fabric reinforced static part that is securely joined to the elastomer sealing lip. The sealing lip is also pre-loaded with a garter spring. | Mills, ship building, steel hydraulics engineering, wind power plants. | 0,05MPa | 20m/sec | -30/+100C |
 | Radiamatic® R 37 (195kB) | Simmerring with a fabric reinforced static part that is securely joined to the elastomer sealing lip. The sealing lip is also pre-loaded with a garter spring. | Mills, ship building, steel hydraulics engineering, wind power plants. | 0,05MPa | 20m/sec | -30/+100C |
 | Radiamatic® RHS 51 (238kB) | High-speed Simmerring made from two functionally suitable elastomer components and an integrated steel strip. Two interleaved tension springs ensure an even radial force over the entire circumference length of the sealing edge even with high shaft centre offset. | Rolling mills, large gearboxes. | 0,02MPa | 25m/sec | -30/+100C |
 | Radiamatic® R 58 (189kB) | Simmerring with a fabric reinforced static part that is securely joined to the elastomer sealing lip. The sealing lip is also pre-loaded with a garter spring. | Mills. | 0,05MPa | 20m/sec | -30/+100 |
